CCNA Exp1 Task Assessment Chp 11-Configuring and Testing Your Network

1.

Refer to the exhibit. What command will place the router into the correct mode to configure an appropriate interface to connect to a LAN?
UBAMA# configure terminal
UBAMA(config)# line vty 0 4
UBAMA(config)# line console 0
UBAMA(config)# interface Serial 0/0/0
UBAMA(config)# interface FastEthernet 0/1

CCNA Exp1 Task Assessment Chp 10-Planning and Cabling Networks

1.

Refer to the exhibit. A student working in the lab selects a cable that is wired as shown. Which connection types can successfully be made with this cable? (Choose two.)
connecting a PC to a router’s console port
connecting two routers together via their fast ethernet ports
connecting two switches together at gigabit speeds
connecting a PC to a switch at Gigabit Ethernet speeds
connecting two devices with the same interface type at Fast Ethernet speeds

CCNA Exp1 Task Assessment Chp 9-Ethernet

1.

In the graphic, Host A has reached 50% completion in sending a 1 KB Ethernet frame to Host D when Host B wishes to transmit its own frame to Host C. What must Host B do?
Host B can transmit immediately since it is connected on its own cable segment.
Host B must wait to receive a CSMA transmission from the hub, to signal its turn.
Host B must send a request signal to Host A by transmitting an interframe gap.
Host B must wait until it is certain that Host A has completed sending its frame.

CCNA Exp1 Task Assessment Chp 8-OSI Physical Layer

1. Which type of cable run is most often associated with fiber-optic cable?
backbone cable
horizontal cable
patch cable
work area cable 

CCNA Exp1 Task Assessment Chp 7-OSI Data Link Layer

1. Which options are properties of contention-based media access for a shared media? (Choose three.)
non-deterministic
less overhead
one station transmits at a time
collisions exist
devices must wait their turn
token passing

CCNA Exp1 Task Assessment Chp 6-Addressing the Network - IPv4

1. How many bits make up an IPv4 address?

128

64

48

32 **

CCNA1 Final Exam version 4.0 (100 on 100)

1 A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC?
Use the ipconfig /all command at the host�s command prompt.
X Use the ping 127.0.0.1 command at the command prompt.
Use the traceroute command at the command prompt to identify any failures on the path to the gateway.
Use FTP to check for connectivity to remote sites.
Download a troubleshooting tool from the PC manufacturer’s website.

CCNA Exp1 Task Assessment Chp 5-OSI Network Layer

1-

Refer to the exhibit. The network in the exhibit is fully operational. What two statements correctly describe the routing for the topology that is shown? (Choose two.)

- 192.168.0.2 is the next-hop address that is used by R3 to route a packet from the 10.0.0.0 network to the 172.16.0.0 network.

- 10.0.0.1 is the next-hop address that is used by R1 to route a packet from the 192.168.12.0 network to the 10.0.0.0 network.

CCNA Exp1 Task Assessment Chp 4-OSI Transport Layer

1- Why is flow control used for TCP data transfer?

- to synchronize equipment speed for sent data

- to synchronize and order sequence numbers so data is sent in complete numerical order

- to prevent the receiver from being overwhelmed by incoming data

- to synchronize window size on the server

- to simplify data transfer to multiple hosts

Task Assessment CCNA Expl1 Chapter 3

1- What three protocols operate at the Application layer of the OSI model? (Choose three.)

- ARP

- DNS

- PPP

- SMTP

- POP

- ICMP

CCNA Exploration1 Chapter 2: Network Fundamentals (Version 4.0)

1- What is the proper order of the layers of the OSI model from the highest layer to the lowest layer?

- physical, network, application, data link, presentation, session, transport

- application, physical, session, transport, network, data link, presentation

- application, presentation, physical, session, data link, transport, network

- application, presentation, session, transport, network, data link, physical

- presentation, data link, session, transport, network, physical, application

CCNA Exp1 Chapter 1-Living in a Network Centric World

1. Which of the following descriptions are true regarding the management connections

on a Cisco router? (Choose three.)

- They are non-network connections.

- They are used to connect the router to the rest of the production network.

- They are synchronous serial ports.

- They are used for initial router configuration.

- They are asynchronous serial ports.

- They are accessed using their assigned IP address.

CCNA Exploration1 Chapter2: Summary and Review: Q and A

Q1- List 5 end devices, 6 intermediate devices, and 3 forms of networking media.

A1-

-     End devices: desktop computer, laptop computer, server, PDA, cellular mobile phone, printer, security camera, IP phone, electronic point of sale device, automatic teller machine

-     Intermediate device: repeater, hub, wireless access point, switch, router, modem, and firewall

-     Networking media: copper cable, fiber cable, radio (wireless)

CCNA Exploration1 Chapter1: Quiz

1. Which form of communication is a real-tem text-based communication type used between  two or more people who use mostly text to communicate with each other?

- Weblogs

- Wikis

- Instant messaging

- Podcasting

- Collaboration tools